Tap Connector Adapter for Round & Square Taps | Adjustable Click-Lock Hose Fitting with 1/2" & 5/8" Female Connector

This tap connector adapter is designed to connect a compatible indoor tap to a standard garden hose system using a click-lock outlet.

Suitable for compatible round and square taps with a downward-facing spout. As tap designs vary, please check the tap shape and maximum dimensions shown in the size guide before ordering to ensure a suitable fit.

Important Compatibility Information

Maximum tap outlet dimensions: approximately 35mm wide × 35mm high.

Adjustable fitting range: approximately 20–35mm. The lower screw-adjustment section provides approximately 15mm of adjustment to help position the connector around a compatible tap spout.

The tap outlet should be a suitable round or square downward-facing spout that allows the adaptor and internal seal to sit securely around the end of the tap.

This adaptor is not suitable for all kitchen, bathroom or mixer taps.
It is not suitable for:

• Oval-shaped tap spouts
  
• Pull-out or spray taps
  
• Flexible-neck taps
  
• Curved or unusually shaped outlets
  
• Oversized or non-standard tap ends
  
• Tap spouts wider than 35mm
  
• Tap spouts taller than 35mm

This adaptor is designed for specific compatible tap shapes and sizes. A tap being within the maximum measurements does not automatically guarantee compatibility if the shape of the spout is unsuitable.

For best results, only use the adaptor where it can sit securely and evenly around the tap outlet.

★ DESIGNED FOR COMPATIBLE ROUND & SQUARE TAPS: Suitable for compatible downward-facing round and square tap spouts within the stated size limits. This product should not be considered suitable for every tap.

★ MAXIMUM TAP OUTLET SIZE 35MM × 35MM: Designed for compatible tap spouts measuring up to approximately 35mm wide and 35mm high. Both the size and shape of the tap outlet must be checked before purchase.

★ ADJUSTABLE FITTING RANGE 20–35MM: The lower screw-adjustment section provides approximately 15mm of adjustment, allowing the fitting gap to be adjusted from approximately 20mm to 35mm for compatible tap spouts.

★ CLICK-LOCK HOSE OUTLET: The lower outlet connects to compatible standard click-lock garden hose fittings, including commonly used Hozelock- and Gardena-style systems.

★ FEMALE HOSE CONNECTOR INCLUDED: Supplied with a female quick-connect hose fitting suitable for compatible 1/2" and 5/8" hose pipes.

★ ADJUSTABLE TAP CLAMP: The locking lever and adjustable lower section allow the adaptor to be positioned and tightened around a suitable tap spout.

★ INTERNAL SEAL FOR CORRECT POSITIONING: The internal white seal should sit centrally around the tap outlet. Correct alignment is important for a secure connection and to reduce water escaping around the adaptor.

★ SIMPLE HAND INSTALLATION: No specialist tools are required. The adaptor can be fitted by hand to a compatible tap, provided the tap shape and dimensions are suitable.

Before purchasing, please check the maximum tap outlet dimensions of approximately 35mm wide × 35mm high, as well as the tap shape. The adjustable fitting gap ranges from approximately 20mm to 35mm.

If you experience any difficulty fitting the adaptor, do not continue tightening it, as excessive force may damage the adaptor or your tap. Instead, remove the fitting, check the tap shape and dimensions, reposition the adaptor and refit it carefully.